| The TX-DAB 100 OCR series of echo-cancelling
repeater transmitters provide a
complete and highly reliable SFN DAB re-broadcast solution in one product.
Ideal not only for gap-filling and network densification, the TX-DAB OCR range can
also be used for repairing coverage deficiencies caused by ACI (Adjacent Channel
Interference) and improving in-building coverage. In fact, it can replace a
conventional DAB transmitter in many applications.
Our new version has greatly improved echo-cancelling algorithmns derived from the
reknown BBC echo-cancelling design. Importantly, and unlike most other DAB/DMB
repeaters, the DSP technology continually optimises the output for guaranteed stability
allowing it to produce over 100W of output on the same frequency as the incoming
off-air signal!
Uniquely, our TX-DAB100/OCR provides TII removal, ensuring regulatory compliance.
The integrated receiver/transmitter architecture increases reliability, reduces
maintenance requirements, and requires just 3U of rack space.
| RF |
|
| Frequency: |
174.928 to 239.200MHz |
| Rx input level: |
-65 to -35dBm |
| RF output power: |
100W (DMB/DAB power) |
| Max echo (absolute): |
15db nominal (system foldback) |
| Max echo (recommended): |
10dB |
| Rx input connector: |
'N' female 50ohm |
| Tx output connector: |
'N' female 50ohm |
| Power
Supply |
|
| Input AC: |
100V to 264V (48 - 62 Hz) |
| Mechanical |
|
| Size: |
133mm (H) x 483mm (W) x 505mm
(D) |
| Weight: |
18kg |
| Temperature: |
0 to +40 degrees C |
| Humidity: |
95% (relative non-condensing) |
| |
| We reserve the right to alter specifications
without notice |
|
|
|
| Availabilty: Special order item |
|
| Not available to buy on-line |
£POA |
|
